 |
|
|
The Following list shows all of the new parts included in every rebuilt engine: |
| |
|
- Rod and Main Bearings
- Oil Pump and Chain
- Timing Chain and Guide Rails
- Re-Ground Camshaft
- New or Re-Ground Valves
- Hardened Valve Seats
- Rocker Arms
- Rocker Shafts
- Valve Guides
- Piston Rings
- Timing Belt
- Gaskets and Seals
- Freeze plugs
|
First off, we only choose the best cores
to rebuild - the rest get scrapped. We know that the best cores make the best engines,
and with our huge inventory of cores we can be very selective as to which cores get
rebuilt and which ones don't. Once a core is selected, it undergoes careful inspection
for cracks, wear, and heat stress. If it passes the inspection, it is then disassembled,
cleaned, stripped to bare metal, and precision measured for specifications. If the
engine specs OK, it's on to the machine shop for precision machining. All machine
work is done to exact tolerances, and all measurements are triple checked before
re-assembly. The assembly process is a painstaking procedure done entirely by hand
(not on an assembly line). All engines are assembled in climate controlled clean
rooms by certified engine technicians. During assembly all machined surfaces are
measured once again for accuracy. Once assembled, each engine undergoes dyno testing
for compression, leakdown, oil pressure, and leak detection using ultraviolet dye
- and must pass our final quality control inspection checklist. If everything checks
out, the engine is crated in a custom wooden crate to prevent shipping damage and
each package is insured at full value in the unlikely case of a mishap in transit.
- Free quotes and consultations for all BMW engine related inquires.
- No core charges — all core deposits are 100% refundable — regardless of the
condition of your core (most applications). No core surcharges except on select
performance applications.
- All internal parts replaced are OEM or better
- All machine work meets or exceeds factory specifications — and all tolerances
are triple checked before final assembly
- All engines assembled by hand in climate controlled clean rooms
- All engines tested dynamically for compression, leakdown, oil pressure, (and
oil leaks using Ultra Violet dye process)
- All long-block engines include complete gasket sets for installation and new
spark plugs
- All Gaskets and mating surfaces treated with factory Anaerobic Sealer to prevent
fluid leaks
- Performance Upgrade Engines include flow tested CNC porting, hand polishing,
and Bavarian Performance Camshaft
|
|
